Top Pourer Foam Maker-TPF

Top Pourer Foam Maker(TPF)

Foam Chamber (Brochure Download)

 

Model No. 6020

Operating Pressure 2.5 to 10 bar

For Fixed Roof Storage Tank

  Easy Maintenance

 

Application:

The GPE Top Pourer Foam Maker(TPF) is designed for use in foam systems for the protection of flammable liquid storage tanks and combine foam generation, vapor sealing and foam pouring in a robust, low-maintenance integral unit.

Features and Benefits:

There are four basic body sizes with capacities ranging from 75 to 3,300 liters/min. at inlet pressures between 3 and 10 bar g. Each unit is factory calibrated to perform at a fixed flow and pressure point within the limits shown over its name plate. Then the system is therefore able to make the most cost effective use of available water and foam concentrate resources.

The discharge characteristics of the TPF are enhanced by the deflector plate fitted to the outlet which disperses the finished foam against the tank interior shell. This ensures a rapid spread across the surface of the tank content, whilst lowering the application velocity to reduce contamination of the foam by the tank content.

TPF units are fitted with a unique bursting disc fabricated from impregnated graphite to seal the tank and prevent vapor loss. Graphite is used to ensure that the disc will burst when subjected to the pressure of foam entering the top chamber but will not burst during normal tank operations such as filling and discharging. The use of graphite enables the bursting pressure to be held within tolerances of ± 0.05 bar (± 0.75 Psi).

 

TPF Dimensions (mm)

 

 

Model
No.

A

B

C

Approx.

Weight
(Kg)

 

 

TPF 50

550

300

125

28

 

 

TPF 80

800

500

225

56

 

 

TPF 100

850

575

275

86

 

 

TPF 150

1100

850

325

118

 

 

 

 

 

 

 

 

 

 

For detailed installation information refer to technical data sheet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pressure – Flow Graph:

 

How To Order:

 

For easy ordering, select proper model numbers

60

Top Pourer Foam Maker

 

Code

Type

20

TPF, Foam Chamber

 

Code

Inlet & Outlet Connection Size

01

2 ” In, 3’’ Out

02

3 ” In, 4’’ Out

03

4 ” In, 8’’ Out

04

8 ” In, 10’’ Out

 

Code

Working Pressure (bar)

xxx

Set Pressure is xxx Bar.

 

Code

Body Material

1

Aluminum

2

Ductile Cast Iron

3

Carbon Steel

4

Stainless Steel

 

Code

Connection Type

1

Flat Face Flange

2

Raised Face Flange

 

Code

Class

1

ANSI 125

2

ANSI 150

 

 

 

Sample:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

0

2

0

-

0

3

-

0

1

0

-

3

-

1

-

2

 

 

 

Indicates a Model 6020 with Carbon Steel  body, Working P 10 bar. , flat face flange  class 150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Persian GPE Co . All rights reserved